For Minolta KD-400Z NP-500 NP-600 DR-LB4
The high quality replacement For Minolta KD-400Z NP-500 NP-600 DR-LB4 is made from grade A material for better performance.The For Minolta KD-400Z NP-500 NP-600 DR-LB4 is RoHS & CE compliant and is manufactured to iso 9001 standards and backed by a 30 day money back guarantee & 1 year manufacturer warranty
Ref : CS-NP5009
Part No : NP-500 NP-600 DR-LB4
Compatible with : DiMAGE G400 DiMAGE G500 DiMAGE G530 DiMAGE G600 Digital Revio KD-510 Digital Revio KD-400Z Revio KD-420Z Revio KD-310Z Digital Revio KD-500Z Digital Revio KD-310Z Revio KD-510Z Revio KD-410Z Revio KD-310 Digital Revio KD-410Z Digital Revio KD-310 Revio KD-500Z Revio KD-400Z
Battery Type : Li-ion
Battery Capacity : 850 mAh
The For Minolta KD-400Z NP-500 NP-600 DR-LB4 comes in a discharged condition and must be charged before use (refer to the devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the may require three to four charge/discharge cycles before achieving maximum capacity.
When charging the For Minolta KD-400Z NP-500 NP-600 DR-LB4 for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the from the device reinsert it and repeat the charging procedure.
It is important to condition (fully discharge and then fully charge) the every two to three weeks. Failure to do so may significantly shorten the's life (this does not apply to Li-Ion batteries which do not require conditioning). To discharge simply run the device under the's power until it shuts down or until you get a low warning. Then recharge the as instructed in the user's manual.
If the will not be in use for a month or longer it is recommended that it be removed from the device and stored in a cool dry clean place.
It is normal for a to become warm to the touch during charging and discharging.
A charged will eventually lose its charge if unused. It may therefore be necessary to recharge the after a storage period.
The milliamp-hour (mAH) rating of the Hi-Capacity™ will often be higher than the one on the original. A higher mAH rating is indicative of a longer lasting (higher capacity) and will not cause any incompatibilities. A Hi-Capacity™ will in most cases outperform the original by 30% to 50%.
Do not short-circuit. A short-circuit may cause severe damage to the.
Do not drop hit or otherwise abuse the as this may result in the exposure of the cell contents which are corrosive.
Do not expose the to moisture or rain.
Keep away from fire or other sources of extreme heat. Do not incinerate. Exposure of to extreme heat may result in an explosion Se alle sælgers varer